WATTBOX - POWER CONDITIONER WITH SAFE VOLTAGE, 12 OUTLETS

 Download the Operations Manual

 Download the Specifications

WattBoxT Power Conditioner with Safe Voltage,12 Outlets - 4320J, 2 EMI/RFI Filters, 2 Coax, 2 Ethernet:

The WB-400-VCE-12 power conditioner provides 12 outlets on the back of the rack - where you need them most. Of course if you're mounting it to the back of a cabinet or on the wall, it comes with all the necessary hardware for that, too. Connected equipment is safe and sound thanks to best-in-class surge protection of power, coax, and telephone/Ethernet - plus noise filtration for improved audio and video performance. The WB-400-VCE-12 also includes Safe Voltage protection, a feature that disconnects connected equipment when there is sustained over/under voltage. But our engineers just couldn't stop there - this is custom install! So, instead of using inexpensive plastic, they built it like a tank with an 18 gauge steel chassis. Now THAT'S professional grade power.

Rack Mount Versatility: Normal chassis-based power products put the outlets closer to the front of the rack, making them tough to reach and some cases impossible to use wall warts. That just didn't make sense - so our engineers designed a better way. Wattbox's exclusive back-of-rack mounting puts those hard-to-reach outlets where you need them most. The included brackets let you mount it in any direction - straight on for traditional installation, up/down/angled for increased visibility when installed at the top or bottom of the rack, you can even recess it for easier cable management and to reduce depth.

Cabinet/Shelf Mounting: Whether you're installing into a rack, shelf, or cabinet, we have you covered! Simply turn the small bracket around backwards and the surge protector can easily mount in the back of a cabinet or on a wall. Turn the bracket facing down, apply the included feet and you can quickly secure it to a shelf or the top of the cabinet.

Power Adapters Welcome: We've been there before - you get all the power cords just where you want them, only to forget about the "wall wart" for the IR block or the network switch or the... Then you have to undo something just to make it all fit - oh... and then the bulky "wart" covers up the outlet next to it! To solve this, we have spaced the outlets as far apart as possible and turned them 90-degrees so every outlet can be used. And since those bulky power supplies are prone to falling out, we even supply tie-down straps to keep them in place.

Less is More: Other manufacturers pad their chassis with lots of dead space in a failed attempt to get the outlets near the back of the rack. This adds cost, wastes space - and more important, really doesn't solve the problem of outlet accessibility. The back-of-rack Wattbox design gets the outlets where you need them and removes the unnecessary bulk to give you more room in the rack.

Safe Voltage: Ever noticed a light that dimmed for a few seconds during a storm? This low-voltage condition is typically caused by power grid issues - and it can have an adverse effect on your equipment. WattBox Safe Voltage will protect your gear by automatically disconnecting it during sustained under AND over voltage conditions. When the input voltage returns to a safe level, the equipment will be reconnected automatically.

Noise Filtration: Sensitive A/V equipment is negatively impacted by noisy appliances and other electronics that create interference on the AC line. All Wattbox power conditioners feature noise filtration that cleans up this "dirty power" to deliver the purest A/V experience possible. By lowering the audio noise floor and reducing hum, you hear exactly what wa