Personal menu

CROWN - ANALOG INPUT, 4 CHANNEL, 600W PER OUTPUT CHANNEL

SKU: CDI-4-600

Availability:

Richmond : 0

Special Order

Mississauga : 0

Special Order

Call for pricing

CROWN 600 CDI DRIVECORE SERIES AUDIO POWER AMPLIFIER, 4-CHANNEL, 600 W AT 4 OHM

The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 4|600 offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more. Designed for ease-of-use in a variety of applications, the 4|600 is a 4-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.

FEATURES

DriveCore Technology - Crown's proprietary DriveCore technology eliminates hundreds of components within each amplifier, reducing the variability of component values, increasing reliability, resulting in incredible audio fidelity from an efficient design.

Network Control and Monitoring - Through Harman's HiQnet Audio Architect software, the CDi DriveCore can be controlled, configured, and monitored through standard TCP/IQ network.

DSP - On-board Digital Signal Processor in each amplifier allows for custom configuration

Input Router
Input Delay - Up to 1000ms
Input Parametric EQ - 8 band
Crossover
Output Parametric EQ - 8 band
Output Delay - Up to 100ms
LevelMAX Limiter

Direct Drive 70/100 Vrms Output - Each output channel is capable of provide either 70V or 100V for high impedance applications.

Front-Panel Interface - Completely configure the amplifier using an intuitive front-panel interface.

GPIO/AUX Port - Recall presets, mute channels, monitor faults, power on/off the amplifier, and more through a combined GPIO/AUX Port.

Pre-loaded Speaker Tunings -For quicker and easier setup and installation.

CDI-4-600
Sub Brand	Crown
Series	CDi DriveCore
Model	600
Number of Channels	4
Power Output	600 W at 4 Ohm, 600 W 70 Vrms (Dual Mode), 600 W at 4 Ohm, 1200 W 140 Vrms (Bridge Mono Mode)
Input Impedance	20 kOhm Balanced, 10 kOhm Unbalanced
Sensitivity	0.7 Vrms at 8 Ohm
Total Harmonic Distortion	0.35% at 20 Hz - 20 kHz
Signal-to-Noise Ratio	>104 dB (100 V, 20 Hz - 20 kHz at 8 Ohm)
Damping Factor	>1000 at 20 - 100 Hz
Frequency Response	20 Hz - 20 kHz (+/-0.25 dB, 8 Ohm)
Crosstalk	>80 dB at 20 Hz - 1 kHz
Digital Signal Processing	96 kHz, 32-Bit Floating Point
Voltage Gain	34 dB
AC Line Voltage	100 - 240 VAC at 50/60 Hz
Connector Type	(4) Balanced Audio Input (Terminal Block), (4) Speakers Output (Screw-Type), LAN (RJ-45), GPIO
Indicators	LED
Display	LCD
Rack Spacing	2U
Dimensions	19 Inch W x 13.55 Inch D x 3-1/2 Inch H
Weight	16.3 lb

Products specifications

Amplifier Type	8 Ohm
Bridgeable	Yes
Watts Per Channel	500W+
Channels	4-Channel
Type	Amplifier

Product tags

(6409)

CROWN - ANALOG INPUT, 4 CHANNEL, 600W PER OUTPUT CHANNEL

CROWN 600 CDI DRIVECORE SERIES AUDIO POWER AMPLIFIER, 4-CHANNEL, 600 W AT 4 OHM

FEATURES

Flexible Payment Solutions

RMA Request Form

Staub Shipping Desk

Payment options